World's first Twin vectored thrust ducted fan RC Jet performs maneuvers not possible with other RC Jets. This is a BIG all molded foam jet with great detail and great performance. Two 64mm fans with two 3500 Kv Outrunner brushless motors and two 45 Amp brushless speed controllers power the big jet.
Take off from a smooth runway or short grass field are quick and the initial thrust will blast the jet nearly straight up.

The pilots in attendance at the 2009 Southeast Electric Flight Festival (SEFF) voted the Su-34 the "Best New Product" after watching the incredible flight performance of this cutting edge aircraft. Maneuvers that simply cannot be done with other jets are routine with the vectored thrust nozzles of the Su-34. The famous "Cobra Maneuver" can be flown as well as flips and tumbles that will amaze your flying buddies.

Each nozzle is individually controlled and is mixed with both elevator and aileron controls. A 7-channel computer radio (minimum) is a must. The jet is easy to fly and very solid in the air, however due to the setup, the model is best suited for the experienced to advanced RC pilot.

The Su-34 comes with a set of retractable landing gear with twin wheel trucks for the mains and steerable twin wheel nose gear. Each gear has its own adjustable servo for gear retraction. There are a total of 10 servos pre-installed in the jet: 2-elevator, 2-aileron, 2-vectored thrust, 3-gear retract, 1-steering.
Assembly only takes about 1-2 hours; epoxy glue is included for gluing wing and tail parts to the fuselage. Landing gear is pre-installed as are all other servos and control surfaces. The included 4-cell 3000 mAh lipo battery pack provides about a 4-minute flight - but what an exciting 4 minutes! An Su-34 Fullback Airframe Only version is also available.

Colours: Army Green and Blue

SPECIFICATIONS
Wingspan: 900mm
Length: 1450mm
Takeoff Weight: 1.5kg
Included: 2 x 2836 outrunner
Included: 2 x 45A ESC
Included: 10 x 9g mini servos
Included: Mechanical retracts
Included: Water slide decal

INCLUDED:
Jet plane (with Thrust Vectoring Nozzles) 90% assembled
All 10 x servos, 2 x 3500 Kv Outrunner brushless motors, ESC and retracts.

REQUIRED COMPONENTS
4 cell 3200-4000mah 25c batt
6-8CH TX and RX
Charger

FlySkill Level: Advanced